Получите консультацию специалиста
Заполните форму и наш специалист свяжется с Вами
Отримайте консультацію фахівця
Заповніть форму і наш фахівець зв'яжеться з Вами
Get specialist advice
Fill out the form and our specialist will contact you

HOME SOLAR POWER PLANTS

Order station calculation

FASTENING SYSTEMS FOR HOUSEHOLD SOLAR POWER PLANTS

Racks for ground solar plants
Racks for roof solar stations

BASE FOR SOLAR PANELS

Due to the fact that energy prices are unstable and vary, solar panels are an excellent solution to save on electricity and to be non-volatile.

Solar energy can be used not only for lighting and heating of apartments. Solar panels provide stable operation of traffic lights, signs and placards and can be used as an energy source for illuminating roads and bridges. Solar panels are also used as backup energy sources.

Ground screws are increasingly used installing solar power station. The main benefit of such screws is that the generation of electricity can start in 2 days, and not in 15-30 days as with a concrete base.

Solar power plant on screw piles has many advantages:

  • the foundation for solar power plant is easy and quick to install;
  • ground screws can be installed in winter in the frozen ground;
  • ground screws for solar power plant are environmentally friendly, building a this foundation does not change the surrounding landscape;
  • during the installation of screw piles there is no garbage;
  • if necessary you can dismantle and relocate the solar power plant;
  • the foundation for solar panels has long operational lifetime.
In addition to the production of ground screws for solar power stations, PILLAR also manufactures metal structures for it. Such a frame for solar panels suits well to ground screws for assembly and has high reliability, durability and stability.

The company PILLAR designs foundations for solar panels as for solar power stations, prepares the foundation drawings and calculates the foundation for both solar power stations and solar panels. Drawing design of a foundation for solar panels and solar power station is also included in our services.

The company PILLAR offers ground screws for the construction foundations of solar panels. We produce, design and install pile-screw foundations in Kyiv, Kharkiv, Dnipro, Odesa, Mykolaiv, Lviv, Zaporizhzhia and other cities of Ukraine.
Member of the Association of Solar Energy of Ukraine

ADVANTAGES OF THE RACKS ON GROUND SCREWS FOUNDATION FOR SOLAR POWER STATIONS

Easy installation
The foundation on ground screws requires no complicated concrete and earthworks, as well as no special equipment. Our basement for solar panels is also easy to assemble.
No noise and no vibration
Such feature of installation of ground screws allows to use them even in difficult situations when installation of the concrete foundation is impossible.
Mobility
При необходимости свайно-винтовой фундамент можно разобрать и собрать на другом участке. Заливной фундамент данной особенностью не обладает.
No season limitations
Building a concrete foundation in winter is very difficult. Installation of ground screws can be done regardless of the season and weather conditions.
Keeping the construction site clean
Pile foundation for solar power stations neither pollutes environment nor damages the ecosystem. This technology allow you to save the flora on the site and leave no debris. This is a good solution for the construction of solar power farms of all sizes.
Time saving
Ground screw foundation for communication towers can save up to 93% of time compared to the traditional foundation.

TYPICAL DESIGNS FOR GROUND SOLAR STATIONS

Portrait designs
Metal structures for above-ground solar stations with a book orientation of panels 1650x992 or 1950x992mm with a foundation made with ground screws.

  • Number of panels: 14, 20, 26, 32, 38, etc. (You can add 6 panels to the primary 14-panel design);
  • Panel size: 1650x992 mm and 1950x992mm;
  • Number of rows: 2;
  • Number of piles: 8 (+2 per row added);
  • Tilt: 30º;
  • Warranty period of the structure is 25 years;
  • Table length: 10100 mm;
  • Width: 2904 mm (3449mm);
  • Height: 2450 mm (2615mm);
  • Designs developed by Pillar according to the standards and requirements of DBN B.1.2-2-2006;
  • Racks and ground screws are made of state standard specification 27772-88 C235 / C355 steel coated with hot zinc with a thickness of at least 70 microns. The coating meets the requirements of GOST 9.307-89;
  • The LSTK profile is made of rolled steel C350 + Z350 (EN 10326 and EN 10346).
Landscape designs
Metal structures for above-ground solar stations with landscape orientation of panels 1650x992 with a foundation made with ground screws.

  • Number of panels: 12, 20, 28, 36, 44, etc. (You can add 8 panels to the primary 12-panel design);
  • Panel size: 1650x992 mm;
  • Number of rows: 4;
  • Number of piles: 12 (+2 per row added);
  • Tilt: 30º;
  • Warranty period of the structure is 25 years;
  • Table length: 18350 mm;
  • Width: 3508 mm;
  • Height: 2649 mm;
  • Racks and ground screws are made of state standard specification 27772-88 C235 / C355 steel coated with hot zinc with a thickness of at least 70 microns. The coating meets the requirements of GOST 9.307-89;
  • The LSTK profile is made of rolled steel C350 + Z350 (EN 10326 and EN 10346).
WORK EXAMPLES
DO YOU HAVE QUESTIONS?
Leave your contact details and we will call you back

STAGES OF INSTALLING A SOLAR POWER PLANT

Ordering
To start the calculation from the customer, we need to obtain the following data: the desired power of the station, the size and thickness of the panels, the number of tables and rows, as well as the orientation of the panels, their angle of inclination and rise above the ground. For the construction of large facilities, geological survey data will also be required.
Design
In order to correctly place tables for solar stations on the plots, it is necessary to carry out competent design work. It takes into account the size and weight of the structure, its area, soil geology, wind and snow loads. The result of the calculations is the determination of the optimal size of ground-screws and uniform distribution of the load on the structure.
Installation
Installation of structures begins immediately after the first delivery to the facility. Complex terrain or bad weather conditions are not obstacles for the installation of a screw base for solar panels. First, marking of the pile field is carried out, ground-screws are mounted, then a frame for solar panels is installed and the panels themselves are installed. We can also mount additional facilities.

GROUND SCREWS FOR SOLAR POWER PLANT

Pillar - is your partner in building ground screw foundations

Our advantages:
  • own production of ground screws and steel structures for solar panels;
  • many years of experience;
  • team of construction engineers;
  • continuous improvement of our products;
  • customer-friendly prices for ground screws and steel constructions;
  • we accept requests from all regions of Ukraine: Kyiv, Kharkiw, Dnipro and other cities.
To get a free assistance, clarify the cost of the foundation on ground screws for your hydraulic structure call our hotline. You can also require a call back just three clicks on the Pillar website. Our experts will contact you promptly and provide all the necessary information.